---
title: CMP fittings and junctions in a week | Contech
description: Request additional information about Contech fabricated CMP junctions and fittings, including lead times, fabrication details, and project review support.
---

[![Contech Engineered Solutions, A Quikrete company](https://solutions.conteches.com/hubfs/Contech-AQC-Logo.png)](https://www.conteches.com/)

[PIPE](https://www.conteches.com/pipe) [BRIDGES AND STRUCTURES](https://www.conteches.com/bridges-and-structures) [STORMWATER MANAGEMENT](https://www.conteches.com/stormwater-management) [START A PROJECT](https://www.conteches.com/start-a-project)

## Fittings and Junctions in a Week

Junctions stop driving the storm schedule.

6–8 weeksTypical junction box lead time

1 weekContech-fabricated CMP junctions and fittings

Typical junction box

6–8 weeks

Contech CMP junction

about 1 week

5–7 weeks back in the schedule

*012345678***Weeks of lead time**

Plan and elevation of a fabricated CMP junction: a 48-inch riser with 36-inch, 30-inch, and 24-inch inlets and a 42-inch outlet set at plan angles and inverts48″RISER36″ IN42″ OUT30″ IN24″ IN AT 45°PLANELEVATIONFINISHED GRADE48″RISERINV. 24″ ININV. 36″INV. 42″ OUT

Typical fabricated CMP junction. Stubs are set at the plan angles and inverts before it leaves the plant.

### What we fabricate

- Junction structures and risers
- Tees, wyes, and laterals
- Elbows and bends to any angle
- Reducers and increasers
- Detention headers and manifolds
- End sections and outlets

### Why it matters

- A late design change costs days, not two months.
- Lighter than precast, so it’s easier to set.
- Matched to the line’s material and coating.

1. ### Share the plan and profile
   
   Sizes, angles, and inverts for each junction.
2. ### Approve fabrication drawings
   
   Detailed by Contech for your EOR’s review.
3. ### Fabricated and shipped
   
   Delivered with the pipe in about a week.

Lead times vary by region, configuration, and plant schedule. Typical junction box lead times reflect industry experience and are not a Contech quote.

## Questions we hear before fabrication starts

### What information do you need to review a fabricated junction?

We usually need the pipe sizes, inverts, plan angles, line application, and the material or coating already specified on the project. If you have plan sheets, profiles, or markups that show field constraints, include those too. That speeds up the drawing review and helps us flag issues early.

### Can the fitting match the pipe and coating already on the job?

Yes, that is typically the goal. We review the pipe system you are using, the coating or corrosion protection required, and the connection geometry so the fabricated piece fits the line as designed. If a requested combination has a limitation, we will point it out before fabrication.

### Is a one-week lead time guaranteed?

No. Lead time depends on the plant schedule, region, fabrication complexity, and the details released for production. About one week is a typical timing for many fabricated CMP junctions and fittings, but it is not a project quote. We confirm timing once the configuration is defined and reviewed.

### When does a fabricated CMP junction make more sense than a conventional box?

It usually makes sense when you need lighter handling, faster installation, or a junction that follows the line geometry without forcing a separate structure into the layout. If the job has unusual loading, site access limits, or material constraints, we can review those conditions and help you evaluate the trade-offs.

## Request additional information

Tell us what you are building and where the fitting sits in the line. Include pipe sizes, plan angles, inverts, coating requirements, and any schedule pressure on the job. We will review the information and help you determine the next step.

- Project location and application
- Pipe sizes, angles, and inverts
- Material and coating requirements
- Target schedule or delivery window

### Let Us Know How We Can Help!

![Contech A Quikrete Company logo](https://solutions.conteches.com/hubfs/Logos/Contech-AQC-Logo-white-125.png)

Contech Engineered Solutions provides fabricated CMP junctions and fittings for drainage and stormwater lines across North America. Lead times vary by region, configuration, and plant schedule.